Podkładka kapton TO3 (10szt)

  • Producent: AAVID THERMALLOY
  • Kod producenta: 43-03-01G
  • Dostępność: Jest
  • komplet
  • Cena netto: 0,81 zł 1,00 zł

Podkładka kaptonowa pod obudowę TO3,  ROHS

Part Number A B C D
43-03-1G 43.94
(1.730)
31.75
(1.250)
3.56
(0.140)
1.57
(0.062)
Property Electrical -Typical Value @ 25°C Test Method
  Thermalfilm™ Thermalfilm™MT  
Dielectric Strength 03mm (1 -mil)
275.6 x 103 volts/mm
(7,000 volts/mil)
177.2 x 103 volts/mm
(4500 volts/mm)
ASTM D149-64
Dielectric Constant 3.5 4.3 ASTM D150-64T
Dissipation Factor 0.002 0.002 ASTM D150-64T
Volume Resistivity 1017 ohm-cm 1017 ohm-cm ASTM D257-61
Surface Resistivity 1016 ohms 1016 ohms ASTM D257-61

Corona Start Voltage .025mm (1 -mil)

465 volts 465 volts ASTM D1868-61T
Insulation Resistance 100.00 megohm mfds. 100.00 megohm mfds. Based on 0.05 mfd wound capacitor using 0.25mm (1 -mil) Film
PHYSICAL
Ultimate Tensile Strength (MD) 1.72 x 108 Pa (25,000 psi) 103 MPa (1500 psi) ASTM D882-64T
Bursting Strength Test (Mullen) 3.10 x 105 Pa (45 psi) 0.31 MPa (45 psi) ASTM 0774-63
Tear Strength - Initial 27,559 gm/mm (700 gm/mil) 35,433 gm/mm (900 gm/mil) ASTM D1004-61
Density 1.42 gm/cm3 (88.7 lb/ft3) 1.78 gm/cm3 (111.1 lb/ft3) ASTM D1505-63T
Folding Endurance(MIT) >10,000 cycles >10,000 cycles ASTM D2176-63T
THERMAL
Melting Point None None  
Zero Strength Temperature 815°C (1499°F) 815°C (1499°F) Hot Bar (Du Pont Test)
Cut Through Temperature 435°C (815°F)
525°C (977°F)
435°C (815°F)
525°C (977°F)
Weighted Probe on Heated Film
(Du Pont Test)
Service Temperature -260°C to 240°C)
(-464°F to 464°F)
-260°C to 240°C)
(-464°F to 464°F)
 
Thermal Conductivity 0.156Wm/K
(0.09 BTU/hr-ft-°F)
0.379Wm/K
(0.219 BTU/hr-ft-°F)
Model TC-1000 Twin Heatmeter
Comparitive Tester
Flammability V-0, UL 'E' card E39505 V-0, UL 'E' card E39505 UL 94